Filter
Top Products
42 Hewlett-Packard Jornada 420 Palm-size PC
To install Windows CE Services
1. If you want to upgrade to Microsoft Outlook 98, install it
first.
2. Insert the Desktop Software for Microsoft Windows CE
compact disk into the CD-ROM drive on your desktop
PC.
3. The Windows CE Services Setup Wizard should start
automatically. If it does not start, click
Run
on the
Start
menu, and then type d:\setup, where d is the
letter assigned to your CD-ROM drive.
4. Follow the instructions that appear on your screen to set
up Windows CE Services.
5. The Windows CE Services Get Connected dialog box
appears and prompts you to connect the HP Jornada.
If you connect using the sync cable, connect your
P/PC as described in “Connecting by sync cable” on
page 42, and then click
Start
.
If you connect by infrared, click
Cancel
, and skip to
“Connecting by infrared” on page 47.
If you chose
Manual
synchronization, you need to tap
Start
,
tap
Programs
, tap
Communication
, and then tap
PC Link
.
Connecting by sync cable
The HP Jornada uses a serial connection to communicate with a
desktop PC. The serial connection is established with the sync
cable (included with the HP Jornada) and a 9-pin serial
communications port on your desktop PC.
The HP Jornada 420 connects to the sync cable via the cradle.
If you do not have a 9-pin serial port on your desktop PC, or if
the port is in use by another device, such as a printer or modem,
you may need to obtain an adapter from your computer
manufacturer.