A SERVICE OF

logo

Chapter 8 Page 193
on your network, you must select Network from the
HotSync Manager menu on both your primary computer
and the computer you want to use.
3. From the HotSync Manager menu, choose Setup.
4. Click the Network tab and make sure your user name has a check
mark next to it. If the check mark is not there, click the check box
next to your user name.
5. Click OK.
6. Place your handheld in the cradle and press the HotSync button.
The HotSync operation records network information about
your computer on your handheld. With this information, your
handheld can locate your computer when you perform a
HotSync operation over the network.
To prepare your handheld for a dial-in network HotSync operation:
Note: If you are performing a network HotSync operation via a
LAN, you do not need to prepare your handheld and can skip
to the “Performing a network HotSync operation via a LAN”
section.
1. Tap the Applications icon .
2. Tap the HotSync icon .
3. Tap the Menu icon .
4. Tap Options, then tap Modem Sync Prefs.
5. Tap Network.
6. Tap OK.
Note: See “Network preferences and TCP/IP software” in Chapter 9
for information on configuring Network HotSync preferences.