Filter
Top Products
8
The 9p23 portable handset is delivered with the standard
belt clip. If there is a need to replace the belt clip, see
instructions below.
Step one: remove the belt clip
To detach the belt clip from the handset:
1. Loosen the retention screw of the belt clip from the
handset (see Figure 2.2).
2. Slide the metal clip upward in the slot
(see Figure 2.3).
Step two: attach the belt clip
To attach the belt clip to the handset:
1. Slide the metal bar on the clip into the molded slot on
the back of the handset until it snaps into place (see
Figure 2.1).
2. Tighten the retention screw to secure the belt clip
onto your handset (see Figure 2.2).
The radio frequency (RF) performance of the 9p23
portable handset will degrade significantly when the belt
clip is removed or modified. Do not remove or modify the
belt clip for normal use without first consulting Ascom.
Getting Started
Figure 2.1
Belt clip
Figure 2.2
Retention screw
Figure 2.3