Filter
Top Products
21
Menu Options
Use the steps described previously to view and change
handset settings in all menus. To exit any menu or
submenu without changing settings use the Right Soft
key to choose Back, Cancel or Save.
To change a handset setting within a menu or submenu,
use the Left Soft key to Confirm or Save. “Data Saved”
may appear briefly in the display to indicate that handset
settings were successfully changed. If no action is taken
within 30 sec., the handset returns to Standby mode.
Depending on configuration, some of the following
features may not be available. Check with your system
administrator to determine if your 9p23 is enabled for
Limited or Full Menu support.
Use handset menus
Follow the steps below to change the ring volume
settings on the 9p23 portable handset.
1. While the handset is in Standby mode, use the Left
Soft key to select Menu.
2. Use the down arrow of the Scroll key until the Sound
Setup option is displayed (see Figure 9.1).
Figure 9.1
3. Use the Left Soft key to choose Select and enter the
Sound Setup menu options.
4. Use the up or down arrows of the Scroll key until the
Sound Profiles option appears in the display and use
the Left Soft key to select this option.
5. Use the up or down arrows of the Scroll key until the
Customize option appears in the display and use the
Left Soft key to select this option.
6. Use the Left Soft key to select Normal Profile from
the options displayed, then again to choose Ring
Volume.
7. The ring volume control panel will appear in the
handset’s display (see Figure 9.2).
Figure 9.2
8. Use the up and down arrows of the Scroll key to
adjust ring volume. The display will indicate volume
level by the length of the horizontal bar. As the
different volume levels are selected, the handset will
ring once at that volume level.
9. Use the Left Soft key to choose Confirm once the
desired ring volume level is selected. The display will
then return to the previous menu.
10. Use the Right Soft key to select Cancel to return to
the previous menu option or press the On Hook key
to exit the Sound Setup menu.
Menu shortcuts
To quickly access Main menus, submenus and setting
options, use the down arrow of the Scroll key when the
handset is in Standby mode to open the Main menu. Then
use the numeric keypad to enter the desired Main menu
number, submenu number and menu setting number.
Example
To adjust the 9p23 ring volume, press the following keys
in this order:
Down arrow on Scroll key
Sound Profiles
Activate
Normal Profile
Ring Volume
For a complete list of menu and submenu numbers, see
Full and Limited Menu overview sections of this guide.