Filter
Top Products
84
Features
Garmin DGPS - Allows DGPS input using a Garmin beacon receiver and a standard RT-
CM SC-104 and DGPS tuning.
NMEA In/NMEA Out - Supports the output of standard NMEA 0183 version 3.0 data. Use
this for real-time plotting with MapSource or 3rd party programs.
Text Out - Allows ASCII text output of location and velocity information without input capa-
bilities.
RTCM IN - Allows DGPS input using a standard RTCM SC-104 format without output capa-
bilities.
RTCM In/NMEA Out- Allows DGPS input using a standard RTCM SC-104 format and sup-
ports the output of standard NMEA 0183 version 3.0 data.
RTCM In/Text Out- Allows DGPS input using a standard RTCM SC-104 format and simple
ASCII text output of location and velocity information.
None - Provides no interfacing capabilities.
If ‘Garmin DGPS’ or ‘RTCM In/NMEA Out’ format is selected, additional fields are provided
to control a Garmin differential beacon receiver (e.g. GBR 23) directly from your unit. Tuning is
automatic with ‘Scan’ or you can enter the beacon frequency and bit rate when you select ‘User’
from the Beacon list to manually tune the receiver. Refer to the beacon receiver instructions.
To select a serial data format:
1. Highlight the Serial Data Format field and then press the THUMB STICK IN.
2. Highlight an option and then press the
THUMB STICK IN to activate it.
Setup Page
Interface Setup Page