Filter
Top Products
85
Features
System Setup Page
The System Setup Page allows you to change GPS operation modes, use the WAAS capabili-
ties, turn the Message Beep and compass on or off, choose the battery type, and set the altimeter
calibration settings to automatic or manual. See the Appendix for WAAS capability information.
To access the System Setup page:
1. Press the PAGE button or the Menu icon to open the Main Menu.
2. In the Main Menu, scroll down and select Setup.
3. Select the System icon to open the System Setup page.
The Option Menu allows you restore defaults or display the current version of unit
operating software and the Unit I.D. Number. Software updates and instructions for download-
ing are available from the Garmin web site (www.Garmin.com).
Choose one of the four GPS options other than ‘Normal’ to significantly save battery power.
The ‘Battery Saver’ mode reduces the rate of satellite signal position updating and the ‘GPS Off’
option stops satellite signal reception altogether. The ‘Demo Mode’ simulates navigation.
To change the battery type:
1. Use the THUMB STICK to highlight the ‘Battery Type’ field and then press IN.
2. Then use the
THUMB STICK to select the desired option and press IN. Use the following
settings for different battery types:
Setup Page
System Setup icon
System Setup Page
BATTERY TYPE SET UNIT TO
Alkaline Alkaline
NiMH NiMH
NiCad NiMH
BATTERY TYPE SET UNIT TO
Lithium (1.2V) NiMH
Lithium (1.5V) Alkaline