Filter
Top Products
67
Features
Routes Page
Adding or Editing from the Route Map Page
You can use the panning arrow with the Route Map Page displayed to add or edit route
waypoints.
To add a point at either end of a route:
1. Select the Route from the Routes List. Press the THUMB STICK IN to display the Route
Page.
2. Highlight the on-screen ‘Map’ button at the bottom of the page and press the
THUMB
STICK IN to display the Route Map Page.
3. Use the
THUMB STICK to move the panning arrow to either end of the displayed route
until the end point is highlighted. Then press the THUMB STICK IN and select ‘Add Turns’.
This option appears only when highlighting the end point of a route.
4. Move the panning arrow to a map item or location where you would like to extend the
route and press the THUMB STICK IN to display the Information Page for the new point.
5. Press the on-screen ‘Use’ button to return to the map page and then press the
THUMB
STICK IN again to place the new waypoint.
To add a route point within a route:
1. Follow steps 1 and 2 in the previous instruction.
2. Use the
THUMB STICK to move the panning arrow to a route line. When the arrow
touches the line, the line becomes thin. Press the
THUMB STICK IN to display the word
‘ADD’ next to the line.
3. Drag the line to a map item or other location where you want to establish a new waypoint
and then press the THUMB STICK IN to place the new waypoint. A waypoint information
page displays. Press the on-screen ‘OK’ button to save the new waypoint, then press it
again after returning to the Route Map.