Filter
Top Products
38
Reference
Altimeter Page
Viewing Points
The ‘View Points’ option allows you to scroll through the stored elevation profile and to
view a single point along the profile. When the pointer is stopped at a location along the pro-
file, the display shows the elevation, time of day and date the point was created.
To use the ‘View Points’ option:
1. Use the THUMB STICK to access the Option Menu.
2. Highlight the ‘View Points’ option and press the
THUMB STICK IN to display the View
Points Page.
3. Move the
THUMB STICK RIGHT or LEFT to scroll the profile past the pointer in the center of
the page.
As the profile moves past the pointer, the status window at the top of page changes to
display the date, time, and altitude for the point beneath the pointer.
Resetting Data
You can reset the elevation data and the maximum elevation data by selecting the ‘Reset’
option from the Altimeter Page Option Menu .
To reset the elevation data and max elevation fields:
1. Use the THUMB STICK to highlight the ‘Reset’ option from the page Option Menu and
press the THUMB STICK IN to display the ‘Reset’ page.
2. Use the
THUMB STICK to highlight the reset options on the page and then press the
THUMB STICK IN to place a check mark in the box next to a selected item.
3. Move to the ‘Apply’ button and press the
THUMB STICK IN to reset the data fields.
View Points Option Page