Filter
Top Products
FM-4000Page 70
[
CLR/WX
]
Key
Immediately recalls the previously selected NOAA weather channel.
Cancel the menu selection and/or keypad entry.
Secondary use
Hold down the
[
16/9
]
key while pressing the
[
WX
]
key to change the
mode from USA to International or Canadian.
[
ENT
]
Key
This key functions as the enter key.
SPEAKER
The internal speaker is located here.
[DISTRESS] KEY
Used to send a DSC Distress call.
13.2 INTERCOM OPERATION
13.2.1 Communication
1. Press one of the Soft key briefly to appear the key functions at the LCD
bottom, then press the
[
IC
]
key to activate the “Intercom” mode.
2. If your FM-4000 is equipped with two Remote MICs, use the
[
T
]
/
[
S
]
key to
select the station (
RADIORADIO
RADIORADIO
RADIO,
RAMRAM
RAMRAM
RAM, or
ALLALL
ALLALL
ALL) you wish to
communicate with, then press the
[
ENT
]
key.
3. When the “Intercom” feature is activated, “
IntercomIntercom
IntercomIntercom
Intercom”
appears on the FM-4000 and CMP30.
4. Press the PTT switch and
“TALK” is displayed.
NOTE: A warning beep is emit-
ted when the Remote MIC’s
PTT switch is pressed while
the transceiver microphone’s
PTT switch is pressed.
5. Speak slowly and clearly into
the microphone, holding the
microphone about 1/2 inch
away from your mouth.
6. When finished, release the
PTT switch.
7. Press the
[
CLR
(
WX
)]
key
again to revert to the “RADIO” mode.
(
FM-4000 display
)(
CMP30 display
)
(
FM-4000’s PTT switch is pressed
)
(
CMP30’s PTT switch is pressed
)