Filter
Top Products
Page 41FM-4000
11.5.2 Setting up Individual Reply
Allows setting up the radio to automatically (default setting) or manually re-
spond to a DSC Individual call requesting you to switch to a working channel
for voice communications. When Manual is selected, the MMSI of the calling
vessel is shown, allowing you to see who is calling. This function is similar to
the caller ID on a cellular phone.
1. Press and hold down the
[
CALL
(
MENU
)]
key
until the “
Radio SetupRadio Setup
Radio SetupRadio Setup
Radio Setup” menu appears.
2. Turn the CHANNEL selector knob to select
“
DSC SetupDSC Setup
DSC SetupDSC Setup
DSC Setup” menu.
3. Press the
[
ENT
]
key, then use the CHANNEL
selector knob to select “
Individual ReplyIndividual Reply
Individual ReplyIndividual Reply
Individual Reply.”
4. Press the
[
ENT
]
key.
5. Turn the CHANNEL selector knob to select “
Au-Au-
Au-Au-
Au-
tomatictomatic
tomatictomatic
tomatic” or “
ManualManual
ManualManual
Manual.”
6. Press the
[
ENT
]
key to store the selected setting.
7. Press the
[
CLR
]
key twice to return to the “
Radio SetupRadio Setup
Radio SetupRadio Setup
Radio Setup” menu, then press
the
[
CLR
]
key again to return to radio operation.
11.5.3 Setting up Individual/Group Call Ringer
When an Individual call or Group call is received the radio will produce a ring-
ing tone for two minutes. This selection allows the Individual call ringer time to
be changed.
1. Press and hold down the
[
CALL
(
MENU
)]
key
until “
Radio SetupRadio Setup
Radio SetupRadio Setup
Radio Setup” menu appears.
2. Turn the CHANNEL selector knob to select
“
DSC SetupDSC Setup
DSC SetupDSC Setup
DSC Setup” menu.
3. Press the
[
ENT
]
key, then use the CHANNEL
selector knob to select “
Individual RingerIndividual Ringer
Individual RingerIndividual Ringer
Individual Ringer.”
4. Press the
[
ENT
]
key.
5. Turn the CHANNEL selector knob to select
ringing time for an Individual call.
6. Press the
[
ENT
]
key to store the selected setting.
7. Press the
[
CLR
]
key twice to return to the “
Radio SetupRadio Setup
Radio SetupRadio Setup
Radio Setup” menu, then press
the
[
CLR
]
key again to return to radio operation.