Filter
Top Products
Page 47FM-4000
6. Press applicable key to enter the first letter of the
name of the group you want to reference in the di-
rectory.
Example: Press the
[
2
(
MEM
)]
key repeatedly to
toggle among the seven available characters asso-
ciated with that key:
22
22
2
Æ
AA
AA
A
Æ
BB
BB
B
Æ
CC
CC
C
Æ
aa
aa
a
Æ
bb
bb
b
Æ
cc
cc
c
Æ
22
22
2
....
If you enter a wrong character, pres the
[
CLR
]
key
to delete the wrong character.
7. Press the
[
ENT
]
key to store the first letter in the name.
8. Repeat steps 6 and 7 to complete the name. The name can consist of up
to 11 characters. If you do not use all 11 characters, press the
[
ENT
]
key to
move to the next space. This method can also be
used to enter a blank space in the name. If you en-
ter a wrong character, press the
[
H/L
]
key until the
wrong character is selected, then enter the correct
character.
9. After the 11th letter or space has been entered, press and hold the
[
ENT
]
key to advance to the Group MMSI (Maritime Mo-
bile Service Identity Number) number entry.
10. Enter the desired number. If you enter a wrong num-
ber, press the
[
H/L
]
key until the wrong number is
selected, then enter the correct number.
11. To store the data entered, press and hold the
[
ENT
]
key.
12. To enter another group address, repeat steps 4
through 11.
13. Press the
[
CLR
]
key twice to return to the “
Radio SetupRadio Setup
Radio SetupRadio Setup
Radio Setup” menu, then press
the
[
CLR
]
key again to return to radio operation.
11.7.2 Transmitting a Group Call
Using Pre-Programmed Vessel
1. Press the
[
CALL
(
MENU
)]
key to show the “
DSCDSC
DSCDSC
DSC
Call MenuCall Menu
Call MenuCall Menu
Call Menu.”
2. Turn the CHANNEL selector knob to select
“
GroupGroup
GroupGroup
Group.” (To cancel, press the
[
CLR
]
key.)
3. Press the
[
ENT
]
key. The transceiver beeps,
and the “Group directory” appears.
4. Turn the CHANNEL selector knob to select the
“Group” you want to contact.
5. Press the
[
ENT
]
key, then turn the CHANNEL
selector knob to select the operating channel you