Filter
Top Products
Page 63FM-4000
12.12 NAMING THE RADIO OR REMOTE MIC
You can change the name of the RADIO or Remote MIC. Example: “RADIO -
Cabin,” “RAM1 - Flybridge.”
1. Press and hold down the
[
CALL
(
MENU
)]
key until
the “
Radio SetupRadio Setup
Radio SetupRadio Setup
Radio Setup” menu appears.
2. Press the
[
ENT
]
key, then use the CHANNEL selec-
tor knob to select “
Unit NameUnit Name
Unit NameUnit Name
Unit Name.”
3. Press the
[
ENT
]
key.
4. With the Remote MIC connected, turn the CHAN-
NEL selector knob to select the Unit (“
RadioRadio
RadioRadio
Radio” or
“
RAM1RAM1
RAM1RAM1
RAM1”) to name, then press the
[
ENT
]
key, other-
wise press the
[
ENT
]
key.
5. Press applicable key to enter the first letter of chan-
nel name.
Example: Press the
[
2
(
MEM
)]
key repeatedly to
toggle among the seven available characters asso-
ciated with that key:
22
22
2
Æ
AA
AA
A
Æ
BB
BB
B
Æ
CC
CC
C
Æ
aa
aa
a
Æ
bb
bb
b
Æ
cc
cc
c
Æ
22
22
2
....
6. Press the
[
ENT
]
key to enter the first letter in the
name and move to the next letter to the right.
7. Repeat steps 5 and 6 to complete the name. The
name can consist of up to eight characters. If you
do not use all eight characters press the
[
ENT
]
key
to move to the next space. This method can also be used to enter a blank
space in the name. To clear the previous letter, press the
[
CLR
]
key.
8. Press and hold the
[
ENT
]
key to enter the name and return to the “
UnitUnit
UnitUnit
Unit
NameName
NameName
Name” menu.
9. If you want to enter the name of another unit, repeat steps 4 through 8.
10. To exit this menu and return to radio operation mode, press the
[
16/9
]
key.