Filter
Top Products
FM-4000Page 40
To transmit an Individual call you must program this directory with information
of the persons you wish to call, similar to the telephone directory of a cellular
phone.
1. Press and hold down the
[
CALL
(
MENU
)]
key
until the “
Radio SetupRadio Setup
Radio SetupRadio Setup
Radio Setup” menu appears.
2. Turn the CHANNEL selector knob to select the
“
DSC SetupDSC Setup
DSC SetupDSC Setup
DSC Setup” menu.
3. Press the
[
ENT
]
key, then use the CHANNEL
selector knob to select “
Individual DirectoryIndividual Directory
Individual DirectoryIndividual Directory
Individual Directory.”
4. Press the
[
ENT
]
key.
5. Select “
AddAdd
AddAdd
Add” with the CHANNEL selector knob,
then press the
[
ENT
]
key.
6. Press applicable key to enter the first letter of the
name of the vessel or person you want to reference
in the directory.
Example: Press the
[
2
(
MEM
)]
key repeatedly to
toggle among the seven available characters asso-
ciated with that key:
22
22
2
Æ
AA
AA
A
Æ
BB
BB
B
Æ
CC
CC
C
Æ
aa
aa
a
Æ
bb
bb
b
Æ
cc
cc
c
Æ
22
22
2
....
If you enter a wrong charactor, press the
[
CLR
]
key
to delete the wrong character.
7. Press the
[
ENT
]
key to store the first letter in the name and move to the
next letter to the right.
8. Repeat steps 6 and 7 to complete the name. The
name can consist of up to 11 characters. If you do
not use all 11 characters press the
[
ENT
]
key to move
to the next space. This method can also be used to enter a blank space in
the name. If you enter a wrong character, press the
[
H/L
]
key until the
wrong character is selected, then enter the correct character.
9. After the 11th letter or space has been entered, press and hold the
[
ENT
]
key to advance to the MMSI (Maritime Mobile Ser-
vice Identity Number) number entry.
10. Enter the desired number. If you enter a wrong num-
ber, press the
[
H/L
]
key until the wrong number is
selected, then enter the correct number.
11. To store the data entered, press and hold the
[
ENT
]
key.
12. To enter another individual address, repeat steps 5
through 11.
13. Press the
[
CLR
]
key twice to return to the “
Radio SetupRadio Setup
Radio SetupRadio Setup
Radio Setup” menu, then press
the
[
CLR
]
key again to return to radio operation.