Filter
Top Products
~13~
9. Any Key Answer (except END, Silent Soft Key)
10. Key-guard
11. Dialing Prefix
a. Up to 14 digits, including pause(s), one access code can be pre-
programmed to be added automatically in front of the dialed number
when dialing from call logs, phonebook, and dial-and-send dialing.
12. Call Hold
a. Places call on hold
b. Battery Hot Swap: Change battery while call is on hold.
13. Mute
14. Phonebook
a. 30 entries, each stores a phone number or handset ID (up to 28-
digit) and name (up to14-character)
b. Alphabetically sorted display and search by letter
c. Dial from display
d. During the stand-by mode, you can enter the phonebook by pressing
¿orÀ scrolling key
15. Key Tone
a. Three-level key-tone volume selections (high/low/off)
b. Four key-tone type selections
16. Call Timer
a. Display call time duration for current call during and immediately
after the call
17. Text Messaging:
a. Editing Message: from a handset, users can edit the short text
message for up to 50 characters. Up to 5 messages can be edited
and stored.
b. Sending Message: In view mode, handset can send a message to
another handset or a group of handsets.
c. Incoming Message: A distinctive tone alerts an incoming message.
The message will stay on LCD display for 8 seconds and then is
saved in memory. A total of 5 incoming messages can be saved.
18. Programmable PBX Options
~14~
a. Allows user to pre-program the most frequently used PBX features
along with feature codes into DuraFon which is adjunct to the PBX
system.
b. Up to 9 entries can be saved.
c. Once the feature and feature codes are programmed, user can
quickly perform those functions during the call by pressing the
OPTION soft key.
Administrator Features
Handsets 11 and 12 are designated administrators. Both have the same
authority to perform base station administrative functions from their handset
menu selections. No password is required.
1. Supports both DTMF and Pulse dialing
a. From an administrator handset (Handset 11 or 12 ), press MENU-9-1
to select Tone or Pulse dialing mode.
b. Default is Tone dialing.
2. Administrator programmable Flash key timing
a. From an administrator handset (Handset 11 or 12), press MENU-9-2-
4 to select flash key timing
b. 9-level (100 ms - 900 ms) timing selections, default= 600 ms.
c. The default value (600 ms) works in most areas. Changing this
setting may result in Flash function not working. Change only when
you are certain of the new value would work.
3. Call Transfer to PBX Extension
a. When install the DuraFon 1X is installed behind a PBX system, you
can pre-program the feature code of call transfer function.
b. Need to adjust the Flash time to match your PBX setting.