Filter
Top Products
~27~
Placing a Call On Hold
1. When a call is in progress, it can be put on hold by
pressing the HOLD (Right) soft key.
2.
To return to the conversation, press “UNHOLD”
Notes:
1. The call being placed on hold can only be “un-hold” by the
handset that puts it on hold.
2. Handset LCD displays a call is being on hold. An alert tone
(double beep) every 30 seconds will remind the handset that a
call is being on hold.
3. If the operation (e.g., call transfer) after putting a call on-hold
fails, the held call may be dropped.
4. You can power off the handset (e.g., change battery) while call
is on hold. After power on again, you can continue the call by
pressing UNHOLD (Left) soft key or select “3” from the Option
menu to terminate the hold state.
5. You can only unhold the call when within the coverage area
of the base. Once you’re out of the base coverage, you can
return to stand-by using “Clear hold” function in the OPTION list
item #3.
Mute
1.
After a link is established, you can press OPTION (Left) soft key and
press “0” to mute the handset microphone.
2.
When mute is active, the other party will not hear your voice, but you
can still hear the other party.
3.
To end the mute, press “UNMUTE” (Left) soft key. Mute is effective only
for the current call.
Do Not Disturb (Silent Ring)
1. Enter the key sequence MENU – Sounds – Ring
Volume, then select “Off”. Press SAVE to confirm
your choice. This will turn off the ringer until it is turn
on again from the menu.
2.
For temporary silencing the ringer when an incoming
11
You have a
Call on hold
UNHOLD
OPTION
11
Sounds: ÇÈ
1. Ring Volume
2. Ring Tone
11
Ring Volume: ÇÈ
Off
SAVE
~28~
call arrives, press SILENT (Left) soft key.
Key Guard
1. To prevent accidental dialing, you can press Menu
(Right) soft key, then press “1” to select KeyGuard
option. The handset keypad is locked. No key entry
is accepted except the power on/off key.
2.
To unlock the keypad, press “UNLOCK” (Left) soft
key, then, within 2 seconds, press the digit “1” to
unlock.
3. Key Guard is in effect until unlocked or powered off.
To View Missed Call(s)
1. Whenever you have missed incoming call(s), you can
press VIEW soft key to enter the call logs information.
2.
You need to subscribe the caller ID service from local
telecom company to retrieve this data.
Battery Recharge and Replacement
1. Charge the battery when one or several of the following happen:
a. Phone beeps twice every two seconds.
b. Battery icon is empty.
c. Phone does not respond when a key is pressed.
d. LCD and backlighting become dim.
e. Talk range shortfall is experienced.
2.
You can replace the handset battery after placing the call-in-progress on
hold.
3. Battery talk time and standby time vary depending on the talk/standby
pattern and the operating distance. Returning the handset back to the
charging cradle as often as possible is recommended for best
performance. Use only manufacturer provided battery and charger!
11
Welcome!
UNLOCK
11
Press 1 to
confirm
unlock
11
You have 1
Missed call
VIEW
MENU