Filter
Top Products
~21~
Basic Operations
Operation Modes
Both the base station and handset have levels of operation at which time
only certain procedures of functions can be performed.
A. Base Operation Modes
1. IDLE mode- this is the default mode. The intercom, broadcast, and
volume keys are active in IDLE mode.
2. TALK mode- the base operates in this mode during phone call,
intercom, and broadcast operation. The “In Use”, “Intercom”, and
“Broadcast” LED will light up respectively.
3. REGISTRATION mode- the base enters this mode by pressing the
REG button for three seconds. There are no active base unit keys once
this mode has been entered. Four LEDs will light up in Registration
mode.
B. Handset Operation Modes
1. IDLE mode- this is the default mode.
a. If there is no on-going activity, the handset
automatically goes into SLEEP/IDLE mode to
save battery power.
b. The handset can be turned off completely by
holding down the END key for 3 seconds.
c. The idle screen display (custom name) can be
edited.
d. The 2-digit number represents the handset ID.
2. Menu mode
a. Press the Right soft function key to activate
MENU mode.
b. In MENU mode, the handset settings and
information contained in memory can be
changed.
c. The functions available through the MENU
selection are covered in greater detail from
page 40.
d. The MENU structure display as below:
11
Welcome!
REDIAL MENU
11
Main Menu: ÇÈ
1.KeyGuard
2.PhoneBook
~22~
Making a Telephone Call
1. Press TALK, wait for dial tone, and then enter phone number.
2. Alternatively, you can enter phone number first then press TALK key.
When using this method, you can use the CLEAR (Left) and DELETE
(Right) soft keys to edit the number entered. “Delete” erases the last
digit entered. “Clear” erases the entire line but remains in the dialing
mode.
3. Speed dial by access the entries in the phone book
a. Press ¿orÀ scrolling key to enter the phone
book
b. Press TALK to dial the number.
4. To abort dialing, press END key.
Main menu Sub-menu
1.Ke
y
Guard
2.PhoneBook
1.Dialed
2.Received
3.Missed
1.Ring Volume
2.Ring Tone
3.Key Volume
4.Ke
y
Tone
1.Dial Prefix
2.Group Select
3.Language
4.Clear
5.Custom Name
6.Contrast
7.Backlight
8.Call Barring
9.Name Tag
0.PBX Options
6.Re
g
istration
7.Text Messa
g
e
5.Settin
g
s
4.Sound
3.Call Lo
g
s
8.Call Mana
g
e
r
1.Tone
2.Flash
3.Xfer PBX
9.S
y
stem
11
EnGenius
8887357888
ADD OPTION
1.Incoming
2.Outgoing