Filter
Top Products
~29~
Advanced Operations
Handset Registration
1. If your handset(s) is purchased as part of a system, it has been pre-
registered with the base station at the factory.
2. If Handset ID reads “00,” that means it is a new handset or the ID has
been erased. You need to register the handset with the base station.
3. Registration:
a. Press MENU-6 to enter the registration mode
b. Press and hold the base’s Registration (REG)
button for 2 seconds until 4 LEDs light up.
c. Press handset key “1”, this completes the
registration process. When you register the
handset to BASE 10, the base will assign a
handset ID between 11 and 19. The assigned ID
will be displayed on the handset LCD, indicating
successful registration.
d. Repeat above steps for all additional handsets.
e. The first two handsets registered will be given ID
11 and 12, which gives them administrator
privileges.
4. De-registration:
a. You can de-register a handset from a base. De-registration will
reset the Handset ID to 00, erase the system security code, and free
up the old ID for future registration.
b. After deregistration, the handset will not be able to use the base to
make or receive phone calls, nor can it intercom other handsets.
c. Press handset Menu (Right) soft key.
d. Press the handset number key “6”, this will enter the handset
registration menu.
e. Press and hold the base’s REG button for 2 seconds until 4 LEDs
come on.
f. Press the handset number key “2”, this completes the de-
registration process. Upon successful de-registration, the handset
will show ID “00”.
Notes:
1. The base has a 30 second registration timeout starting from
11
Main Menu: ÇÈ
5. Settings
6. Registration
11
Registration: ÇÈ
1. Register
2. Deregister
~30~
pressing the REG button. The handset has a 12 second
registration timeout starting from the registration or de-
registration option has been selected. The base and handset
will automatically exit registration mode after timeout.
2. When you conduct the registration procedure with BASE 20, the
handset ID will be ranging from 21 to 29.
3. Up to 4 bases can be installed to form a sub-multiple line
system.
4. Repeat registration or de-registration process if unsuccessful.
Handset Group Subscription
1. Up to nine handset groups (01-09) can be defined and handsets can
decide which group(s) they want to be in.
2. For example, Group 1 represents the Customer Service Group, Group 2
represents the Sales Group, and Group 3 is the Marketing Group.
Suppose that Handset 11 wants to receive incoming rings for all Sales
and Marketing related calls. Then handset 11 will need to “subscribe” to
Group 2 and Group 3.
3. Group Selections:
a. Press handset Menu-5 to enter the handset
setting menu
b. Press number “2”, handset enters group select
menu.
c.
Press ADD soft key and enter two-digit group
number (01-09) to add membership in a group.
d. Repeat for all desired groups.
e.
Delete group selections by pressing DELETE
(Right) soft key and enter group number.
Notes:
1. The handset can change group affiliations at any time.
2. The base (administrator) is not responsible for group
assignments. Consequently, it cannot de-subscribe a handset
from a group.
Registration of Additional Base
1. DuraFon 1X can be installed as the multiple base configurations: up to 4
base units can be registered. The BASE 10 serve as the master base.
11
Settings: ÇÈ
1. Dial Prefix
2. Group Selection
11
Groups
A
DD DELETE