Filter
Top Products
~9~
Handset Illustration
Antenna
Receiver
4-line LCD
Left/Right soft keys
Belt Clip
Holder
Up/Down
scrolling keys
Broadcast key
END & Power
ON/OFF key
2-WAY/
INTERCOM
TALK/ FLASH
Microphone
Travel charger
jack
Headset jack
Battery pack
~10~
Handset Features
Basic Handset Features
1. 4-line LCD (Liquid Crystal Display)
a. The LCD display has LED (Light Emitting Diode) for backlighting.
b. The 1
st
line of LCD consists of icons.
c. Icons explanation from left to right
(1)
RSSI (Receive Signal Strength Indicator)
During a call, the number of bars is
proportional to the radio signal strength
received.
(2) Call in-progress (ON/OFF-Hook)
Indicates if phone line mode is active
(3)
Intercom in-progress
Indicates if Intercom mode is active
(4)
Handset ID
Displays a handset icon and a 2-digit Handset ID
(5)
Two-Digit Address Index
Shows address index when viewing contents of the call logs.
(6)
Line Indicator
Indicates the number of the line being accessed by the handset.
(7)
Battery Strength
z Number of bars is proportional to the amount of battery time
remaining.
z Indicates charging when in charger cradle.
d. The 2
nd
and 3
rd
lines of the LCD, maximum 14 characters each,
display status, message, menu selections, or user-editable
alphanumerical characters.
e The last line displays the left and right soft keys.
2. Ringer
a. Rings to an incoming call.
b. Distinctive alert sounds indicating various events:
(1) Single Beep: successful key entry
(2) Double beep: failed operation or invalid key entry, also indicates power
on/off
(3) Periodic 1-Long-2-Short Beep (every 1 minute): low battery warning
(4) Periodic Long Series of Beeps (repeat every 30 seconds): indicates a
call is on-hold
3. TALK/FLASH
a. Places or answers a telephone or intercom call