Filter
Top Products
2.8 Connection of DECT Portable Stations
Installation Manual 159
3. Repeat the steps 1 and 2 for other CSs, and relocate the CSs when necessary.
a. Overlap adjacent CS coverage areas where the radio signal strength level is "8" by 5 m to 10 m.
b. Overlap the CS coverage areas of at least 2 CSs at any location in the installation site.
c. Make sure that the radio signal strength level is greater than "3" at any location in the service area
demanded by the user.
Notes
• If a channel is set, the results of measurement for the 24 slots on the channel are saved each time.
If the same channel is set, the new results override the previous ones. Therefore, a measurement
of 10 channels × 24 slots in total can be made.
• If correct results cannot be obtained (e.g., there are many error counters), change the location of
the CS and repeat the site survey to select the best location.
5 m to 10 m
Channel no. 0 Channel no. 1
Channel no. 0 Channel no. 1
Channel no. 2 Channel no. 3