D-Link KX-TDA100 Telephone User Manual


 
2.5 Installation of the Extension Cards
Installation Manual 113
Pin Assignments
Amphenol Connector
LED Indications
No. Signal Name Function No. Signal Name Function
1 Reserved 26 Reserved
2 D2A Data port 1 (Low) 27 D1A Data port 1 (High)
3-4 Reserved 28-29 Reserved
5 D2B Data port 2 (Low) 30 D1B Data port 2 (High)
6-7 Reserved 31-32 Reserved
8 D2C Data port 3 (Low) 33 D1C Data port 3 (High)
9-10 Reserved 34-35 Reserved
11 D2D Data port 4 (Low) 36 D1D Data port 4 (High)
12-13 Reserved 37-38 Reserved
14 D2E Data port 5 (Low) 39 D1E Data port 5 (High)
15-16 Reserved 40-41 Reserved
17 D2F Data port 6 (Low) 42 D1F Data port 6 (High)
18-19 Reserved 43-44 Reserved
20 D2G Data port 7 (Low) 45 D1G Data port 7 (High)
21-22 Reserved 46-47 Reserved
23 D2H Data port 8 (Low) 48 D1H Data port 8 (High)
24-25 Reserved 49-50 Reserved
Indication Colour Description
CARD STATUS Green/
Orange/Red
Card status indication
OFF: Power Off
Green ON: Normal (all ports are idle)
Green Flashing (60 times per minute): Normal (a port is in use)
Orange Flashing: Detection of PT-interface CS connection (when
starting up the PT-interface CS)
Red ON: Fault (includes reset)
Red Flashing (60 times per minute): Out of Service
50 25
26 1