Filter
Top Products
3.5.8 Delete Area Codes
This program sequence deletes area code numbers that have been programmed into the system.
1. Press *24 and enter the four-digit MASTER CODE _ _ _ _ (beep).
2. Enter the area code reference number (0 through 9) _ then press * (beep).
3. Enter # # # # then press * (beep).
4. Repeat steps 2 and 3 to delete additional area codes.
5. Press 0# TOGETHER to end this programming step (beeeeeep).
3.5.9 Display Phone Numbers (1815, 1817 Systems Only)
Use this programming sequence to display phone numbers programmed under known directory
codes, i.e. if you wanted to see what phone number was programmed under directory code 271. This
programming sequence will not allow you to delete phone numbers.
1. Press *06 and enter the four-digit MASTER CODE _ _ _ _ (beep).
2. Enter the directory code (1, 2, 3 or 4 digits depending on what was programmed in
3.5.1) then press * (beep).
3. The phone number programmed under the directory code entered in step 3 will be
displayed on the LCD. If C C C C C C C is displayed, this indicates that no phone
number has been programmed under the entered directory code. If the first digit is
flashing, this is the area code reference code and indicates that the number
displayed is a long distance or 10-digit number.
4. To display additional phone numbers press * and repeat step 2.
5. Press 0# TOGETHER to end this programming step (beeeeeep).
46