Filter
Top Products
3.4 PROGRAMMING LETTERS, NUMBERS and MESSAGES
These programming steps apply only to the 1815 and 1817 systems. The keypad on the 1815 and
1817 systems have all the letters of the alphabet, the numbers 0 through 9, and a space key printed
on it. This allows the keypad to be used to program all names and numbers into the systems
electronic directory.
NOTE: Names should not be programmed from a remote location using a touch-tone telephone.
3.4.1 Programming Letters and Numbers
When entering names into the electronic directory using the system keypad or a touch-tone
telephone, pressing the key once will display the first letter listed on the button, pressing twice will
display the second letter, pressing it a third time will display the third letter, and pressing it a fourth
time will display the number (or fourth letter).
Example using the number 6 key:
MNO
6
Press one time to display the letter M
Press two times to display the letter N
Press three times to display the letter O
Press four times to display the number 6
The chart below provides the sequence required to enter each letter and number from the keypad into
the system memory. A sequence is also provided to add a space, clear the display if a mistake is
made, and a sequence to skip a name if there is a desire not to provide a name with a phone number.
To Display Press To Display Press To Display Press
A
2*
N
66*
0
0*
B
22*
O
666*
1
11*
C
222*
P
7*
2
2222*
D
3*
Q
77*
3
3333*
E
33*
R
777*
4
4444*
F
333*
S
7777*
5
5555*
G
4*
T
8*
6
6666*
H
44*
U
88*
7
77777*
I
444*
V
888*
8
8888*
J
5*
W
9*
9
99999*
K
55*
X
99*
SPACE
1*
L
555*
Y
999*
CLEAR
#
M
6*
Z
9999*
SKIP NAME
*#
37