Filter
Top Products
121
Technical Services Group ~ 1-800-283-5936 (USA) ~ 1-801-974-3760
Appendices ~ Appendix E: Serial Commands
PAA - PA Adaptive Mode
This command selects/reports PA adaptive mode for the specified mixer.There can be
only one selection per mixer.
Command form: DEVICE
PAA
<Channel> [Value]
Argument details
Name Description Units
Device 0–7 or * to select all units
PAA Command
Channel 1–8 (select mic input)
Value 0 = Off, 1 = On, 2 = Toggle, Null = Current mode
Example:
#57 PAA 1 0
On XAP 800 unit 7 (
#57
), the PA adaptive mode (
PAA
)
on mic channel
1
is disabled (
0
).
PP - Phantom Power
This command selects/reports the setting of phantom power.
Command form: DEVICE
PP
<Channel> [Value]
Argument details
Name Description Units
Device 0–7 or * to select all units
PP Command
Channel 1–8 (select mic input)
Value 0 = Off, 1 = On, 2 = Toggle, Null = Current mode
Example:
#51 PP 2 1
On XAP 800 unit 1 (
#51
), the phantom power supply
(
PP
) for mic channel
2
is enabled (
1
).
PRESET - Preset Execution/Reporting
This command selects/reports the state of a preset.
Command form: DEVICE
PRESET
<Channel> [Value]
Argument details
Name Description Units
Device 0–7 or * to select all units
PRESET Command
Channel 1–32 (select preset)
Value 0 =Set the preset state to off
1 = Execute the preset and set the state to on
2 = Execute the preset and set the state to off
Null = Returns the current preset state
Example:
#52 PRESET 5 1
On XAP 800 unit 2 (
#52
), preset (
PRESET
)
5
will
execute and set the state to on (
1
).