Filter
Top Products
110
Technical Services Group ~ 1-800-283-5936 (USA) ~ 1-801-974-3760
GREPORT - Gate Report
This command selects/reports the gate status.
Command form: DEVICE
GREPORT
<Value>
Argument details
Name Description
Device 0–7 or * to select all units
GREPORT Command form
Value 0 = Off, 1 = On, 2 = Toggle
Example:
#53 GREPORT 1
On XAP 800 unit 3 (
#53
), the gate reporting
(
GREPORT
) is set to on (
1
).
GRPSEL - Gating Group Select
This command selects/reports which gating group each input is assigned.There can
only be one selection per input.
Command form: DEVICE
GRPSEL
<Channel> [Value]
Argument details
Name Description
Device 0–7 or * to select all units
GRPSEL Command form
Channel 1–8 (selects mic input)
Value 1–4, A–D (selects gating group), Null to return current value
Example:
#54 GRPSEL 1 A
On XAP 800 unit 4 (
#54
), mic channel
1
is assigned
to gating group (
GRPSEL
)
A
.
LABEL - Label
This selects/reports the label of the specific channel identified in the unit.
Command form: DEVICE
LABEL
<Channel><Group>[In/Out] [String]
Argument details
Name Description
Device 0–7 or * to select all units
LABEL Command form
Channel See Groups and Channels, page 97
Group I, O, M, G, P, L, E, U,W, S, C (see page 97)
In/Out 0 = Output, 1 = Input (For Expansion Bus groups only)
String String of up to 20 characters representing the label text.
Null to query and CLEAR to clear the label
Example:
#57 LABEL 1 M WIRELESS
On XAP 800 unit 7 (
#57
), the label
(
LABEL
) for mic (
M
) channel
1
is
WIRELESS
.
Gate report sends a report
on every gate change. If
no mics are gated on, the
report will be sent every 10
seconds.
✍✍
Appendices ~ Appendix E: Serial Commands