Cisco Systems 7941G-GE IP Phone User Manual


 
46 OL-7762-02
Using a Handset, Headset, and Speakerphone
You can use your phone with a handset, headset, or speakerphone.
Obtaining a Headset
Your phone supports four- or six-wire headset jacks. For information about purchasing headsets, see
the “Headset Information” section on page 15.
If you want to... Then...
Use the handset Lift it to go off-hook; replace it to go on-hook.
Use a headset Press to toggle headset mode on and off. If you use
AutoAnswer, see the “Using AutoAnswer” section on page 47 for
exceptions.
You can use the headset in conjunction with all of the controls on
your phone, including and .
Use the speakerphone Press to toggle speakerphone mode on or off.
Many of the actions you can take to dial a number or answer a call
will automatically trigger speakerphone mode, assuming that the
handset is in its cradle and is not lit.
Switch to the headset or
speakerphone (from the
handset) during a call
Press or , then hang up the handset.
Switch to the handset (from the
speakerphone or headset)
during a call
Lift the handset (without pushing any buttons).
Adjust the volume level for a
call
Press during a call or after invoking a dial tone.
This action adjusts the volume for the handset, speakerphone, or
headset, depending on which device is in use.
Press Save to preserve the volume level for future calls.