Filter
Top Products
8
Avaya Definity Gx/PBXLink Integration Guide for Cisco Unity 4.0
OL-3105-15
Avaya Definity Gx/PBXLink Integration Guide for Cisco Unity 4.0
Programming the Avaya Definity/PBXLink Phone System
Programming the Avaya Definity/PBXLink Phone System
If you use programming options other than those supplied in the following procedure, the performance
of the integration may be affected.
Caution In programming the phone system, do not send calls to voice messaging ports in Cisco Unity that cannot
answer calls (voice messaging ports that are not set to Answer Calls). For example, if a voice messaging
port is set only to Message Notification, do not send calls to it.
Make sure that the phone system sends calls only to Cisco Unity voice ports that are set to Answer Calls
on the System > Ports page in the Cisco Unity Administrator. Calls sent to a voice port not set to Answer
Calls cannot be answered by Cisco Unity and may cause other problems.
Do the following procedures as applicable.
To Program the Phone System
Step 1 Use the Add Station <extension number> command (for example, Add Station 2001) to assign an
extension number for each voice messaging port. Set the following options and press Enter.
The options available may vary depending on the software version of your phone system.
Table 2 Voice Messaging Port Options
Option Setting
Extension <the extension number of the voice messaging port>
Type 2500
Port <the physical address of the port>
Lock Messages? n
Test? n
Name VoiceMail 2001
(The extension number must appear within the first 16
characters.)
LWC Reception? n
LWC Activation? y
Redirect Notification? n
Off Premise Station? n
Coverage Msg Retrieval Permission? n
Data Restriction? y
Call Waiting Indication? n
Distinctive Audible Alert? n
Message Waiting Indicator? n
Adjunct Supervision y