Filter
Top Products
24
Avaya Definity Gx/PBXLink Integration Guide for Cisco Unity 4.0
OL-3105-15
Avaya Definity Gx/PBXLink Integration Guide for Cisco Unity 4.0
Setting Up the PBXLink Box
Step 20 After all of the voice messaging ports in the second set are set, press Cancel.
Step 21 On the Port A LTNs menu, press Cancel.
Step 22 On the SMDI Options menu, press the Up or Down arrow to select Port B LTNs and press OK.
Step 23 On the Port B LTNs menu, press the Up or Down arrow to select Mode of Operation and press OK.
Step 24 On the Mode of Operation menu, press the Right or Left arrow to select Random and press OK.
Step 25 On the Port B LTNs menu, press the Up or Down arrow to select Setup Random LTNs and press OK.
Step 26 In the Setup Random LTNs field, enter the voice messaging port values (not the extension) for the third
set of voice messaging port as shown in the following table, and press OK.
Step 27 After all of the voice messaging ports in the third set are set, press Cancel.
Step 28 On the Port B LTNs menu, press Cancel.
Step 29 On the SMDI Options menu, press Cancel.
Step 30 On the Configuration menu, press the Up or Down arrow to select Integration and press OK.
Step 31 On the Integration menu, press the Right or Left arrow to select Started, and press OK.
Step 32 Continue to the “Creating a New Integration with the Avaya Definity/PBXLink Phone System” section
on page 29.
To Set Up the Port LTNs for Three PBXLink Digital Ports (One PBXLink Box with Two Digital Ports and One PBXLink
Box with One Digital Port)
This procedure sets up the port LTNs for every third voice messaging port when the first PBXLink box
uses Port A and Port B, and the second PBXLink box uses only Port A.
Step 1 On the first PBXLink box (which has two digital ports), confirm that the PBXLink Integration option is
set to Stopped by doing the following substeps:
a. On the main menu, press the Up or Down arrow to select Configuration and press OK.
b. On the Configuration menu, press the Up or Down arrow to select Integration.
c. Confirm that the Integration option is set to Stopped.
If the Integration option is set to Started, press OK, press the Right or Left arrow to select Stopped,
and press OK.
Step 2 On the Configuration menu, press the Up or Down arrow to select SMDI Options and press OK.
Step 3 On the SMDI Options menu, press the Up or Down arrow to select Port A LTNs, and press OK.
Table 24 Random LTN Settings for the Third Set of Ports
LTN Number Voice Messaging Port Value
00003
10006
20009
.
.
.
<the remaining voice messaging ports in the third set>