Cisco Systems 4 IP Phone User Manual


 
38
Avaya Definity Gx/PBXLink Integration Guide for Cisco Unity 4.0
OL-3105-15
Avaya Definity Gx/PBXLink Integration Guide for Cisco Unity 4.0
Integrating a Secondary Server for Cisco Unity Failover
Figure 3 Connections Between the Phone System and Cisco Unity Servers
The primary and secondary servers act in the following manner:
When the primary server is operating normally, the secondary server is inactive.
When the primary server becomes inactive, the secondary server becomes active.
When the primary server becomes active again, the secondary server becomes inactive.
Setting Up the Secondary Server for Failover
Do the following procedure to integrate the secondary server.
To Set Up the Secondary Server for Failover
Step 1 Install a secondary server with the same configuration as the primary server. For installation instructions,
refer to the applicable Cisco Unity installation guide.
Step 2 Make all voice connections from the phone system to the corresponding ports on both the primary server
and the secondary server. For example, connect port 1 from the phone system with port 1 on both the
primary and the secondary servers.
Step 3 Connect one serial cable from the SMDI port in the first PBXLink box to the data splitter unit.
Step 4 Connect the remaining two serial cables to the two serial ports on the data splitter unit. Then connect
one serial cable to the serial port on the primary server and the other serial cable to the serial port on the
secondary server.
Step 5 On the Windows Start menu of the secondary server, click Programs > Cisco Unity > Manage
Integrations. The UTIM window appears.
Step 6 On the Integration menu of the UTIM window, click New. The Telephony Integration Setup Wizard
appears.
Step 7 Enter the settings to match the integration settings on the primary server.
Note We recommend not reassigning any unassigned subscribers and call handlers to the new
integration, if you are asked by the wizard. Failover replication will automatically assign the
correct integration.
69257
Primary
Cisco Unity serv
er
Secondary
Cisco Unity serv
er
Data splitter
P
hone
s
ystem
Analog lines
RS-232 serial cables
Digital line
PBXLink
box