Filter
Top Products
21
Avaya Definity Gx/PBXLink Integration Guide for Cisco Unity 4.0
OL-3105-15
Avaya Definity Gx/PBXLink Integration Guide for Cisco Unity 4.0
Setting Up the PBXLink Box
To Set Up the Port LTNs for Two PBXLink Digital Ports on Two PBXLink Boxes
Step 1 On the first PBXLink box, confirm that the PBXLink Integration option is set to Stopped by doing the
following substeps:
a. On the main menu, press the Up or Down arrow to select Configuration and press OK.
b. On the Configuration menu, press the Up or Down arrow to select Integration.
c. Confirm that the Integration option is set to Stopped.
If the Integration option is set to Started, press OK, press the Right or Left arrow to select Stopped,
and press OK.
Step 2 On the Configuration menu, press the Up or Down arrow to select SMDI Options and press OK.
Step 3 On the SMDI Options menu, press the Up or Down arrow to select Port A LTNs, and press OK.
Step 4 On the Port A LTNs menu, press the Up or Down arrow to select Mode of Operation and press OK.
Step 5 On the Mode of Operation menu, press the Right or Left arrow to select Random and press OK.
Step 6 On the Port A LTNs menu, press the Up or Down arrow to select Setup Random LTNs and press OK.
Step 7 In the Setup Random LTNs field, enter the voice messaging port values (not the extension) for each
odd-numbered voice messaging port as shown in the following table, and press OK.
Step 8 After all the odd-numbered voice messaging ports are set, press Cancel.
Step 9 On the Port A LTNs menu, press Cancel.
Step 10 On the SMDI Options menu, press Cancel.
Step 11 On the Configuration menu, press the Up or Down arrow to select Integration and press OK.
Step 12 On the Integration menu, press the Right or Left arrow to select Started, and press OK.
Step 13 On the second PBXLink box, confirm that the PBXLink Integration option is set to Stopped by doing
the following substeps:
a. On the main menu, press the Up or Down arrow to select Configuration and press OK.
b. On the Configuration menu, press the Up or Down arrow to select Integration.
c. Confirm that the Integration option is set to Stopped.
If the Integration option is set to Started, press OK, press the Right or Left arrow to select Stopped,
and press OK.
Step 14 On the Configuration menu, press the Up or Down arrow to select SMDI Options and press OK.
Step 15 On the SMDI Options menu, press the Up or Down arrow to select Port A LTNs, and press OK.
Table 20 Random LTN Settings for Odd-Numbered Ports
LTN Number Voice Messaging Port Value
00001
10003
20005
.
.
.
<the remaining odd-numbered voice messaging ports>