Filter
Top Products
42-9
Cisco CallManager Administration Guide
78-13310-01
Chapter 42 Cisco IP Phone Configuration
Configuring Cisco IP Phones
Updating a Phone
Perform the following procedure to update a Cisco IP phone from
Cisco CallManager.
Procedure
Step 1 Choose Device > Phone.
The Find and List Phones pane displays.
Step 2 Enter search criteria to locate a specific phone, and click Find.
A list of phones that match the search criteria appears.
Step 3 From the list, click the name of the phone you want to update.
The Phone Configuration pane displays.
Step 4 Update the appropriate settings as described in Table 42-1.
Step 5 Click Update.
Step 6 Click Reset Phone to reset or restart the phone and apply the new settings.
Restarting the phone re-registers the phones with Cisco CallManager without
shutting the phone down. Resetting the phone shuts down the phone and brings it
back up (performs a complete shut-down and re-initialization of the phones).
Related Topics
• Cisco IP Phone Configuration, page 42-1
• Adding a Phone, page 42-4
• Resetting a Phone, page 42-7
• Phone Configuration Settings, page 42-12
• Configuring Speed Dial Buttons, page 42-20
• Speed Dial Configuration Settings, page 42-22
• Finding a Phone, page 42-26
• Cisco IP Phones, Cisco CallManager System Guide
• Phone Configuration Checklist, Cisco CallManager System Guide