Filter
Top Products
42-15
Cisco CallManager Administration Guide
78-13310-01
Chapter 42 Cisco IP Phone Configuration
Configuring Cisco IP Phones
Phone Button
Template
Choose the appropriate phone button template. The
phone button template determines the configuration of
buttons on a phone and identifies which feature (line,
speed dial, and so on) is used for each button.
The value you enter overrides the default value for this
type of device. Refer to the “Device Defaults
Configuration” section on page 6-1.
Cisco CallManager does not make this field available for
H.323 clients or CTI ports.
Expansion Module 1 Choose the appropriate template, if your phone is
connected to a Cisco IP Phone 7914 Expansion Module.
Expansion Module 2 Choose the appropriate template, if your phone is
connected to a second Cisco IP Phone 7914 Expansion
Module.
Phone Load Name Enter the custom software for the Cisco IP Phone.
The value you enter overrides the default value for the
current model. For more information, see the “Device
Defaults Configuration” section on page 6-1.
This field is not available for H.323 clients or CTI ports.
Module 1 Load
Name
Enter the custom software for the Cisco IP Phone 7914
Expansion Module, if applicable.
The value you enter overrides the default value for the
current model.
Module 2 Load
Name
Enter the custom software for the second
Cisco IP Phone 7914 Expansion Module, if applicable.
The value you enter overrides the default value for the
current model.
Table 42-1 Phone Configuration Settings (continued)
Field Description