Filter
Top Products
How many fax machines/telephones can you have?
All items of telephone equipment have a Ringer Equivalence Number (REN), which is used to calculate the number
of items which may be connected to any one telephone line. Your BT PaperJet 35 has a REN of 1. A total REN of 4
is allowed. If the total REN of 4 is exceeded, the telephone may not ring.
With different fax/telephone types there is no guarantee of ringing, even when the REN is less than 4.
Switchboard compatibility
This product is intended for use within the UK for connection to the public telephone network and compatible
switchboards which support tone dialling and timed break recall. If in doubt please consult your service provider.
To set the switchboard dialling mode and access code
You must set your BT PaperJet 35 for connection to a switchboard.
1. Press repeatedly until the display shows
INSTALLATION
then press .
2. Display shows
TEL. LINE SET-UP
. Press .
3. Press or to switch between
PUBL.LINE (PSTN)
and
PRIV.LINE(PBX
). Press . For use with a switchboard
select
PRIV.LINE(PBX)
.
4. Set Tone or Pulse dial mode for your switchboard. Press or to display
TONE
or
PULSE
. Press .
5. Press or to switch between
EXT. LINE PREFIX
or
EXT. LINE FLASH
. If your access code to get an outside line is
Recall, choose FLASH. If your access code is a digit(s), choose PREFIX. Press to confirm. If you choose PREFIX,
you are asked for the code. Enter the code using the keypad and press .
6. Set dial mode for the network (in the UK the network dial mode must be set to Tone). Press . Press or to
switch between
PSTN DIAL:TONE
and
PSTN DIAL:PULSE
.
7. Press to confirm.
8. Press to return to standby.
Important: If you set the output mode to Flash, you simply need to press the button on your BT PaperJet 35
to get an outside line. You can then dial the number you want as normal. When you are using an
outside line the display shows E for external call.
Technical information
72
BT PaperJet 35 UG – Issue 2 – Edition 2.1 – 17.02.05 – 6672