Filter
Top Products
29
BT PaperJet 35 UG – Issue 2 – Edition 2.1 – 17.02.05 – 6672
SMS Service centre numbers
Your BT PaperJet 35 is preset to send and receive text messages using
the BT service. If you want to use a different service you will need to
change the service centre numbers.
1. Press then or to scroll to
CONFIGURATION
.
2. Press to display
SERV. CENTRE NO.
3. Press to display
TX SERV. CENTRE 1470P1709400
.
You can delete this number using the button to enter a different one.
4. Press . Display shows
RX SERV. CENTRE 080058752
.
You can delete this number using the button to enter a different one.
5. Press .
6. Press to return to standby.
Sending texts
1. Press to display
SMS SEND
then to display
SMS TEXT
.
2. Use the keypad to write your text message.
3. When you have finished, press . Display shows
TYPE NUMBER
and
NUM/TOUCH/SPEED
.
4. Enter the number you want to send to and press .
5. Display shows
TERMINAL NO.:YES.
Unless you have been asked by your recipient to add a sub-address press
again to display
SEND: YES
. Press again to send the text.
If the person you are sending to has asked you to send to a specific
subaddress then use or to display
YES
and press start to display
RECIP. TERM.NO.: 9
. You can now change the default subaddress (9) to
the required number and press to display
SEND: YES
. Now press
to send.
SMS
Button Character
@ space 1 . / -
abcåäæàç2Γ
defèÈé3∆Φ
ghi ì4
jkl5Λ
mnoñöØò6
pqrsß7ΠΣ
tuvüù8
wxyz9
space + & / 0€£¥$¿ß¡ΘΞΨΩ
Character map