Filter
Top Products
Inserting plain paper
To avoid pages being drawn in together, always fan out the pages first to
separate them, then tap down before placing them in the paper feeder.
Inserting documents for sending
Place up to 5 sheets into the automatic document feeder, making sure
the side to be sent is facing away from you.
When the document has been inserted properly, the display shows
DOCUMENT READY
and the bottom line shows the contrast setting
NORMAL
.
Contrast
You can adjust the brightness for sending or copying light or dark
documents.
NORMAL should be suitable for most documents.
Select DARK when sending light originals and LIGHT when sending dark
originals.
1. Press repeatedly until the display shows
FAX SET UP
then press .
2. Press to display
VARIOUS SETTINGS
then press until
CONTRAST:NORMAL
is displayed.
3. Press or to switch between
NORMAL
,
DARK
and
LIGHT
.
4. Press to confirm and then to return standby.
Faxing
The plain paper feeder holds up to
40 sheets of 70-110g/m
2
paper
The document feeder holds up to
5 sheets of 70 – 110g/m
2
paper.
If the document does not feed properly
into your BT PaperJet 35, press to eject
the page.
17
BT PaperJet 35 UG – Issue 2 – Edition 2.1 – 17.02.05 – 6672
IMPORTANT
Do not insert into the document feeder:
Pages smaller than A5.
Newspaper pages (because of
printer’s ink).
Pages with staples or paperclips,
sticky tape or glue.
Creased or torn pages.
Wet paper or paper with wet
correction fluid.
Glossy or laminated paper.
Paper thicker than 110g/m
2
or
thinner than 70g/m
2
.