Filter
Top Products
If connected to a switchboard, see page 72.
Voice call alert
If your BT PaperJet 35 is set to PHONE/FAX reception, it will
automatically alert you to voice calls with a 20 second tone. You can
change the duration of the tone, from 15 to 40 seconds.
1. Press repeatedly until the display shows
INSTALLATION
.
2. Press repeatedly until the display shows
FAX/TEL TIMER:20
.
3. Press or to scroll through the options:
15
,
20
,
30
or
40
.
4. Press to confirm the option displayed.
5. Press to return to standby.
Remote start code
If you answer a call on an extension phone, before BT PaperJet 35 has
automatically answered, and then find it is a fax call, you can transfer the
call to the BT PaperJet 35 by pressing on the keypad of your phone.
You can change the 5 to another number 0-9 or ✱ if required. You can
also switch remote start off.
1. Press repeatedly until the display shows
INSTALLATION
then
press to display
TEL. LINE SET-UP
.
2. Press again. The display shows
PUBL.LINE(PSTN
).
3. Press repeatedly until the display shows
REMOTE START:ON
.
4. To switch the code off, press or to scroll to
OFF
and press to
confirm.
Or
To change the code press . The display shows
TYPE CODE
above the
current code.
5. Enter the new code - or .
Additional settings 51
BT PaperJet 35 UG – Issue 2 – Edition 2.1 – 17.02.05 – 6672