Filter
Top Products
AVTS R 6.0 Quick Setup For feedback, use document@avaya.com August 2010 4
Overview
This Quick setup guide covers the basic administration tasks to set up SIP and H.323 video
endpoints. For detailed information, see Avaya video conferencing Solutions Networking Guide
6.0. This guide is intended for technicians installing the following video endpoints:
SIP endpoints
● Avaya Series 1000 Video Conferencing Endpoints
● Avaya one-X
®
Communicator
H.323 endpoints
● Polycom HDX video calling systems
● Polycom RMX video conferencing bridge platforms
● Polycom PathNavigator/CMA Gatekeeper
● Avaya one-X
®
Communicator
Prerequisites
● Avaya Aura™ Communication Manager Release 6.0 is installed and functional.
● Avaya Aura™ System Manager 6.0 is installed and functional.
● Avaya Aura™ Session Manager is installed and functional.
● The SIP or H.323 endpoint is installed installed and functional.
Note:
Note: Installation of video features on the endpoints requires Session Manager to be
configured. For instructions, see Administering Avaya Aura™ Session Manager
on http://support.avaya.com.
Note:
Note: All Avaya Aura
TM
components and endpoints must be connected to the network
and able to communicate with each other.
● Familiarity with System Manager domains, SIP entities, entity links, locations,routing, and
dial patterns.
● Familiarity with administering Communication Manager, Domains on Signaling Group and
IP Network Regions, AAR/ARS routing, and endpoint interfaces.