Filter
Top Products
Configuration of SIP video endpoints on Communication Manager 6.0
AVTS R 6.0 Quick Setup For feedback, use document@avaya.com August 2010
13
3 Enabling SIP protocol
Select Communications, click on SIP, and set the following parameters:
● SIP Username : ext. This parameter is the same as step 1 of Table 4: Adding
video users on page 10
● Authorization Name : Same as SIP Username
● Authorization Password : Same as the Shared Communication Profile
Password used in step 2 of Table 4: Adding video users
on page 10
● SIP registarion : Through Proxy
● SIP Proxy : Enabled
● Proxy Hostname : Session Manager FQDN or IP address used for registration.
This is the Session Manager Security Module / SIP Entity IP address or
corresponding FQDN.
● SIP Registrar : Enabled
● Registrar Hostname : Same as Proxy Hostname
● TCP Signalling : Enabled
4 Confirming Registrar Status
Select Communication, click SIP and confirm if:
● Registrar Status: Registered
Table 5: Configuring Avaya Series 1000 Video Conferencing Endpoints