Filter
Top Products
Set Announce Only
.Press the~ key 5 times until
you hear: "SET ANNOUNCE
ONLYH
Set Outg~essage 1
.Press ~ until you hear "Set
Outgoing Message".
.Press ~. The voice prompt
will say "Now Recording", followed
by a tone.
Now press ~ .The voice
.Begin speaking after the tone,
towards the front edge of the Base
Unit. The Base Unit display be-
comes a timer as you record your
outgoing message.
Choose OFF if you want your DT
941 CI to record your callers'
messages (Nbrmal Answering
Mode).
.Your outgoing message must be
longer than 2 seconds.
Choose ON if you only want your
callers to hear your greeting with-
out allowing them to leave you a
message (Announce-Only Mode).
MENU
I
-@-
I
..
Once you've selected OFF (or
ON), press (TIME/SET) to confirm
your selection. The voice prompt
will say: "ANNOUNCE ONLY IS
OFF (or ON)".
MEMO
)
PLAY/STOP
.When done, press (PLAY/STOP1.
Your outgoing message will auto-
matica"y be played back.
You can now program the other 6
functions.
32
DT94102.p65
32
6124/98. 12:20 PM
-@-
prompt will say either OFF or ON.
Repeated presses of SELEC1;;:will
alternate between ON and OFF:
The Base Unit will display either
ON or OF (off) to reflect your
choice.
--
<OC>
-~
o -~I