Audiovox DT 941 CI Answering Machine User Manual


 
First, dial the call normally. Then
activate the Temporary Tone feature
by pressing TONE (the * key). You
can then press the numbers or symbols
you need, and your phqne will send
the proper signals.
Call Waiting
CALL WAITING is a subscription
service, available from most local
telephone service providers. Contact
your provider for details. While you are
on a call, you will hear an alert signal,
warning that a second caller is trying
to reach you. ..:.
To end the call, press @) or place
the handset back in the base. The
phone will automatically go back to
rotary (PULSE) service.
If you subscribe to this service linked
with CALLER ID (CID), the name and/
or phone number of the second caller
can be displayed on the Handset
immediately after hearing the CALL
WAITING alert. For more details, see
CALLER ID (CID).
Switching calls using FLASH
.To switch over to the new call,
press the@:!5]key; the first call
is put on hold.
.To switch back to the first call,
press the @:!5] key again.
I
-(ft-
-fJj>-
Programming Ringer .
The handset ringer is capable of four
different types of ringer tones. The
following sections detail how to select
different ringer types and how to turn
off the handset ringer.
Temporary Tone
If you have rotary (PULSE) telephone
service (TONE/PULSE switch is set to
PULSE), this feature allows you to
temporarily switch to TONE dialing for
such purposes as remote access to
answering machines, bank-by-phone
services, use of calling cards and other
special services.
22
rF
6/24/98. 12:20 PM
22
~
--,-,
DT94102.p65
-~