Audiovox DT 941 CI Answering Machine User Manual


 
~
,:r~:~,~~;
~~,;~;;f~i
If you would like to re-record your
outgoing message, simply repeat
the above steps.
It you would like to return to the
tactory-set outgoing message:
.Press the ~ key until you
hear "Set Security Code".
.Press (SELECT j to hear the
current security code., Every time
you press (SELECT), the code
increases by 1. Holding(SELECT)
increases the security code in
increments of 10. The Base Unit
will display the security code as
you program it.
.Press (TIME/SETj to confirm your
choice. The voice prompt will say:
.Press ~ .The voice pro~pt
will say "Set Outgoing Message".
.PressCELAY/STOP). The outgoing
message will begin playing.
.Press~whileyouroutgoing
message is playing. The voice
prompt will say "butgoing Message
has been erased".
."Security Code is XX":
.Press ~ to go to the next
.Erogra~~i~Q function, or press
lPLAY/STOP) to exit programming
mode.
Press ~ to go to the next
..eroarammi~~ function, or press
lPLAY/STOP) to exit programming
mode.
~
t
~
! !
MENU
ERASE
~
~
PLAY/STOP
1/
Set Security Code
.When you call your DT 941 CI from
a remote location, a two-digit
security code must be entered to
gain access to functions such as
message playb.1ck. The factory
preset security code is 19. You can
designate any two digit security
code you wish, from 00 to 99.
Set Day And Time ;
.When you first power-up your DT
941 CI (or after the Base Unit
experiences a temporary loss of
power), the Message Window will
flash CL, until the Day and Time
is programmed.
.Press ~ until you hear "Set
Day and Time".
33
I-F
-L
-,0
6/24198. 12:20 PM
~
33
OT94102.p65
-=-- -C)
=- ;oC)
c::p--
5/0
<0
-Q
O -a:;,