Filter
Top Products
However. when you dial directly from
Caller ID (CID) memory, only the last
7 digits of the received telephone
number will be used. Consequently.
you would actually dial this:
, "'
Special Message Indicator~
Out of Area Calls c:~'~,::i
If for any reason the telephone number
of the caller is unavailable, or if the
caller is outside the Caller ID {CID)
service area, the message UNAVAIL.
ABLE is displayed.
The AUDIOVOX DT 941CI was
designed to accommodate this
situation. If you need to temporarily
add a long distance prefix and lor area
code (such as 150:?) before the Caller
ID (CID) number, do the following:
.Beginning from the standby mode,
key in the necessary digits. Your
display will look like this:
,
"Private" Calls 'i
If the caller has exercised the" option
to block his or her number from being
sent, then the display will show
PRIVATE.
11::"-7
..-11-1...;1
+
+
Then, to temporarily add the last
7 digits only from a Caller ID
(cia) memory, ~ CID .
...
Transmission Error ;
If an error is detected, the Caller ID
(CID) information is incomplete and
will not be displayed. "TRANSMISSION
ERROR" will be displayed.
.Using the ~ { * ) and ~ {#) keys,
scroll through the received calls to
locate the number you wish to dial.
Once you have located the number
~ish to dial, simply press
lT~!:.!S.) .The last seven digits will
be added to the numbers already
in the display, and the whole
number shown below will be au-
tomatically dialed.
The occasional appearance of
"TRANSMISSION ERROR" on your
display does not indicate a problem
with your unit or your telephone line.
However, if this appears frequently,
you may want to notify your telephone
company.
I-F
I
Il
OT94102.p65
29
-<!;t-
6124/98, 12:20 PM