Filter
Top Products
Noise Or Interference
Your AUDIOVOX DT 941CI cordless
telephone has auto-channel scan
circuitry which will detect excess noise
and change the channel of the phone
to reduce it. This is done automatically.
.,
Out Of Range When Phone ..Is On
If you are presently engaged in a
phone conversation move closer to the
base. If the base unit does not
communicate with the handset within
25 seconds of losing contact, it will
automatically hang up.
Since the AUDIOVOX Dr 941 CI...is a
fully digital phone, it does not suffer
from noise associated with regular
cordless phones. At times you may
experience occasional "drop outs",
especially at the extreme edges of the
phone's range. Simply move closer to
the base unit and this will disappear.
'I
Out Of Range When Phone :Is Off
"
When the phone is OFF, lhe handset
and base still monitor each other to
make sure that they can communicate.
If the handset is moved out of range,
the handset will display .CHANNEL
SEARCHING.. The handset will scan
all channels in an attempt to reestablish
communication with the base. This
process does not require user
intervention; the handset will re-Iink
with the base automatically once it is
brought back within range. The unit
will then be able to receive and place
calls.
Automatic Security Coding
Your AUDIOVOX DT 941 CI phone is
factory set with 16.8 million possible
security codes. This unique security
code allows your handset and base to
recognize each other, and minimizes
the possibility of another cordless
phone using your telephone line.
+
.
Out Of Range Indication
If the handset is moved to a point
where the base and handset can no
longer communicate, the handset will
display CHANNEL SEARCHING, and
scan all channels in an attempt to re-
link with the base.
When the base unit i~ unplugged-
from the power supply, the handset
will display -CHANNEL SEARCH-
ING". Plug the base in again and this
will stop.
40
rF
~
6124/98. 12.20 PM
40
OT94102.p6S
~