Filter
Top Products
57
Answering system setup
Call screening
You can turn the call screening feature on or off.
Unless you change it, the call screening feature
is set to on.
To change the setting:
1. Press SETUP twice. The system will announce
“Call screening,” followed by the current
setting, and then “To change the setting, press
SKIP or REPEAT; to continue setup, press
SETUP.”
2. Press SKIP or REPEAT to change between
on and off.
3. Press SETUP to save your selection and move
to the next menu option.
-OR-
Press
PLAY/STOP to save your selection
and exit the menu.
Remote access code
To access your answering system remotely from
any touch tone phone, you need to enter a two-
digit number (10-99). Unless you change it, the
remote access code is 19.
To change the remote access code:
1. Press SETUP three times. The system will
announce "Remote access code," followed by
the current setting, and then "To change the
setting, press SKIP or REPEAT; to continue
setup, press SETUP."
2. Press SKIP or REPEAT to increase or
decrease the remote access code number by
one. Press and hold SKIP or REPEAT to
increase or decrease the remote access code
number by 10.
3. Press SETUP to save your selection and move
to the next menu option.
-OR-
Press
PLAY/STOP to save your selection
and exit the menu.
Answering system operation