AT&T TL74308 Telephone User Manual


 
Basic operation
Handset locator
The handset locator feature is useful if you misplace
a handset.
To start the paging tone:
Press HANDSET LOCATOR/INTERCOM on the
telephone base. This starts the paging tone at
the handset(s) for 60 seconds to help you locate
the handset(s).
NOTE: When paging, if you press OFF/CLEAR or
MUTE/REMOVE on a handset, the ringer of the handset
will be silent but the handset locator feature will not
be canceled.
To stop the paging tone:
Press PHONE/FLASH, SPEAKER, or any dial
pad key (0-9, *, or #) on the handset(s).
–OR–
Press HANDSET LOCATOR/INTERCOM on the
telephone base.
NOTE: The handset ringer volume also determines the
level of the paging tone. If the handset ringer volume
level is set to off, that handset will be silent for all calls
and paging (page 26).
Telephone operation
17
**PAGING**