Filter
Top Products
7
1. Plug the small end of
the handset charger
power adapter into the
jack on the underside
of the charger, then
route the cord through
the slot as shown.
2. Plug the handset
charger power adapter
into a power outlet not
controlled by a wall
switch.
Getting started
Charger installation
IMPORTANT INFORMATION
1. Use only the power adapters supplied with this product or equivalent. To order a replacement
power adapter, visit our website at www.telephones.att.com, or call
1 (800) 222-3111. In Canada, dial 1 (866) 288-4268.
2. The power adapters are intended to be correctly oriented in a vertical or floor mount position.
The prongs are not designed to hold the plug in place if it is plugged into a ceiling, under-
the-table or cabinet outlet.