Filter
Top Products
36
Answering system operation
1.
Remote access
Use the remote access feature to check your messages
while you are away by calling your home phone number
from any touch tone phone outside of your home. When
the answering system picks up, simply enter a two digit
security code to access your answering system, then enter
remote commands to access your messages. This security
code is set at 19 by default; see page 32 to change it.
Dial your telephone number from
any touch tone phone.
2.
When system answers, enter your
two-digit remote access code (19
unless you have changed it).
3.
Enter remote commands
(see list at right).
4.
Hang up to end call and save all
undeleted messages.
Play all messages
1
Play new messages
2
Delete the message
3
33
Repeat or go back
4
Stop
5
Skip to next message
6
Record announcement
*7to begin recording
5to stop recording
Help menu
*5
Turn system off
0
Turn system on
0
Exit
8
Press to hear all messages.
Press to hear new messages.
Press during playback to delete current
message. Press 3 twice to delete all
old messages when the message is not
playing.
Press during the caller’s message to
repeat the message. Press during the
beginning of the day and time announce-
ment to go back to the previous mes-
sage.
Press to stop any operation (stop play-
back, stop recording).
Press to skip current message and
advance to next message.
Press * 7, wait for beep, then begin
speaking. Press 5 to stop recording and
hear playback of new announcement.
Press to hear list of features & com-
mands.
Press to turn off answering system.
Incoming calls will no longer be
answered.
If off, system will answer after 10 rings.
Enter your access code, then press 0 to
turn on.
Press 8 to end remote access call or
hang up.
NOTE: If you pause for more
than 4 seconds during remote
access, you will hear a help menu
listing all features & commands. If
there is no command for another 20
seconds, the call will end automati-
cally.