Filter
Top Products
11
Telephone operation
DIAL MODE: TONE
Cordless handset programming
Choose dial mode
The dial mode defaults to TONE. If you do not have
touch tone service, you will need to change the setting
to PULSE by following these steps:
1. Press MENU.
2. Press CIDV or ^DIR until the screen displays
DIAL
MODE
: and the current setting.
3. Press SELECT/TRANSFER to change the current setting.
4. Press CIDV or ^DIR to display TONE or PULSE.
5. Press SELECT/TRANSFER to choose displayed dial
mode and exit.
Choose cordless handset display language
The default language for the handset screen displays is
English. To change the language to Spanish (Espanol), or
French (Francais). follow these steps:
1. Press MENU.
2. Press CIDV or ^DIR until the screen displays
LANGUAGE
.
3. Press SELECT/TRANSFER to change the current setting.
4. Press CIDV or ^DIR to choose between ENGLISH,
FRANCAIS, or ESPANOL.
5. Press SELECT/TRANSFER to choose display language
and exit.
Choose ringer volume setting
1. Press and hold CIDV or ^DIR when the cordless
handset is idle (not in use). The screen will display
OFF LOW HIGH.
2. Press CIDV or ^DIR to highlight the desired option
(blinking text). There will be a sample of each ringer
volume.
3. Press SELECT/TRANSFER to choose the blinking ringer
volume and exit.
LANGUAGE
OFF LOW HIGH
NOTE: If you choose OFF, the
cordless handset ringer will be turned
off, and the screen will display RINGER
OFF when the cordless handset is idle
(not in use). If there are any un-reviewed
calls, the screen will display XX MISSED
CALLS instead of RINGER OFF.