Filter
Top Products
10
Telephone operation
Cordless handset programming
Each cordless handset operates as an individual unit.
The ringer sound, ringer volume, date/time, dial mode
and language must be programmed separately for
each cordless handset. Follow the steps below to
program the cordless handset. To stop at any time,
press OFF/CLEAR.
Choose cordless handset ringer sound
1. Press MENU to begin programming.
2. Press CIDV or ^DIR until the screen displays
RINGER:
and the current setting.
3. Press SELECT/TRANSFER to change the current setting.
4. Press CIDV or ^DIR to display 1, 2, 3, 4 or OFF.
There will be a sample of each ringer tone.
5. Press SELECT/TRANSFER to choose the displayed ringer
tone and exit.
NOTE: If you choose OFF, the cordless handset ringer will be turned
off, and the screen will display RINGER OFF when the cordless handset is
idle (not in use). If there are any un-reviewed calls, the screen will display XX
MISSED CALLS instead of RINGER OFF.
Set cordless handset display date and time
1. Press MENU to begin programming.
2. Press CIDV or ^DIR until the screen displays
DATE/TIME
.
3. Press SELECT/TRANSFER to view or change date and
time.
4. Press CIDV or ^DIR to change the month in the date
and time line at the bottom of the display, then press
SELECT/TRANSFER.
5. Repeat step 4 to set day, hour, minute, and AM/PM.
6. Press SELECT/TRANSFER to save selection and exit.
RINGER: 1
DATE/TIME
1/01 12:00
am
NOTE: You can choose to set the
time manually, or you can allow it to be
set automatically with incoming caller ID
information. The time will be set automat-
ically only if you subscribe to the caller ID
service provided by your local telephone
company (see page 5). The date and
time for the answering machine need to
be set separately (see page 29).