Filter
Top Products
8
Getting started
8
Wall mounting
The telephone base can be installed on any standard telephone outlet as shown below.
Choose a location away from electronic equipment such as personal computers, com-
puter routers, television sets or microwave ovens. Avoid excessive heat, cold, dust or
moisture.
3) Plug the power adapter into electrical
outlet not controlled by a wall switch.
4) Plug the telephone line cord into a
modular telephone wall jack.
5) Position the wall
mount bracket
over the wall outlet
mounting pegs.
Press and slide the
wall mount bracket
down firmly so it is
held securely on
the outlet mounting
pegs.
1) Connect the telephone line cord and
the power adapter to the telephone
jack at the bottom of the telephone
base and the modular telephone wall
jack, as shown on page 6.
2) Install the wall mount bracket onto
the telephone base. First put the two
front wall mount bracket tabs into the
front notches on the bottom of the
telephone base, then squeeze the rear
tabs of the wall mount bracket when
inserting them into the rear notches
on the bottom of the telephone base.
NOTE: To disassemble the wall
mount bracket, squeeze the rear notches
while lifting up the wall mount bracket
back and away from the telephone base.
b
a
b
a