Filter
Top Products
30
Answering system operation
Day and time announcements
To set day and time
Before playing each message, the answering system
announces the day and time the message was received.
Before using the answering system, follow the steps on
the left to set the day, time and year, so messages are
dated correctly. If you subscribe to caller ID service, the
day and time will be set automatically, in which case you
only need to set the year. If the clock is not set, before
playing messages, the system will prompt "Time and
date not set" each time.
The system uses voice prompts to guide you. Each time
you press SKIP or REPEAT , the day, hour, minute or
year increases or decreases by one. When you hear the
correct setting, press CLOCK to move to the next set-
ting.
To check day and time
You can press CLOCK anytime to hear the
current day and time without changing them.
NOTES:
1. Press and hold SKIP or REPEAT to increase or decrease the
minute or year by 10 (the year can be set from 2000 to 2039).
2. Caller ID provides the time and date. Set the year so that the day of the
week can be calculated from the caller ID information. After setting the
time once, it will thereafter be set automatically with incoming caller ID
information. The time will be set automatically only if you subscribe to the
caller ID service provided by your local telephone company (see page 5).
1.
Press CLOCK
The system announces the cur-
rent clock setting, then announces
"To set the clock, press
CLOCK."
2.
Press CLOCK
3.
Press SKIP or
REPEAT
4.
Press SKIP or
REPEAT
Press SKIP or
REPEAT
until the system announces the cor-
rect hour, then press CLOCK.
until the system announces the cor-
rect minutes, then press CLOCK.
until the system announces the cor-
rect day, then press CLOCK.
5.
6.
Press SKIP or
REPEAT
until the system announces the cor-
rect year, then press CLOCK. The
system announces the current clock
setting.
The system will announce the cur-
rent day setting, then announces "To
change the day, press SKIP or
REPEAT , to change the hour,
press CLOCK."
16